DOCS / REFERENCE
Drawer runners
KerfCraft sizes each drawer box on undermount runners with these numbers, from the planning sheet of the maker. The runner is the longest nominal length that fits the clear depth. The back of the box gets a rear notch at each bottom corner and a bore for each rear hook. Check the dimensions on the current sheet for your part number before cutting.
To choose the runners of a carcass, see Add drawers to a carcass.
Blum TANDEM 560H
| runners value | blum-tandem |
|---|---|
| Drawer side thickness | 11 mm to 16 mm |
| Nominal lengths | 250, 270, 300, 320, 350, 380, 400, 420, 450, 480, 500, 520, 550, 600 mm |
| Part numbers | 560H2500B to 560H6000B |
| Locking devices, 1 pair for each drawer | T51.1700.04 |
| Inside width of the box | opening width − 42 mm |
| Clear depth needed | nominal length + 3 mm |
| Box length | nominal length − 10 mm |
| Underside of the box sides above the underside of the runner | 14 mm |
| Largest box height | opening height − 21 mm |
| Underside of the drawer bottom above the underside of the sides | 13 mm |
| Rear notch in the back, from the inner face of each side | 35 × 13 mm |
| Front screw line above the underside of the runner | 37 mm |
| Push-to-open version | TIP-ON, for example 560H2500T |
| Push-to-open: smallest gap round the front | 3.5 mm |
| Push-to-open: front screw line | 38 mm |
| Push-to-open: clear depth behind an inset front | nominal length + front thickness + 7 mm |
| Push-to-open: also in the BOM for each drawer, for a 564 mm opening | TIP-ON synchronisation linkage T57.1140S cut to 533 mm |
Blum TANDEM 19 mm 560F
| runners value | blum-tandem-19 |
|---|---|
| Drawer side thickness | 17 mm to 19 mm |
| Nominal lengths | 250, 270, 300, 350, 400, 450, 500, 550, 600 mm |
| Part numbers | 560F2500B to 560F6000B |
| Locking devices, 1 pair for each drawer | T51.1700.04 |
| Inside width of the box | opening width − 49 mm |
| Clear depth needed | nominal length + 3 mm |
| Box length | nominal length − 10 mm |
| Underside of the box sides above the underside of the runner | 14 mm |
| Largest box height | opening height − 21 mm |
| Underside of the drawer bottom above the underside of the sides | 13 mm |
| Rear notch in the back, from the inner face of each side | 35 × 13 mm |
| Front screw line above the underside of the runner | 37 mm |
| Push-to-open version | TIP-ON, for example 560F2500T |
| Push-to-open: smallest gap round the front | 3.5 mm |
| Push-to-open: front screw line | 38 mm |
| Push-to-open: clear depth behind an inset front | nominal length + front thickness + 7 mm |
| Push-to-open: also in the BOM for each drawer, for a 564 mm opening | TIP-ON synchronisation linkage T57.1140S cut to 525 mm |
Blum MOVENTO 760H/766H
| runners value | blum-movento |
|---|---|
| Drawer side thickness | 12 mm to 16 mm |
| Nominal lengths | 250, 270, 300, 320, 350, 380, 400, 420, 450, 480, 500, 520, 550, 580, 600, 650, 700, 750 mm |
| Part numbers | 760H2500S to 766H7500S |
| Locking devices, 1 pair for each drawer | T51.7601 |
| Inside width of the box | opening width − 42 mm |
| Clear depth needed | nominal length + 3 mm |
| Box length | nominal length − 10 mm |
| Underside of the box sides above the underside of the runner | 16 mm |
| Largest box height | opening height − 23 mm |
| Underside of the drawer bottom above the underside of the sides | 13 mm |
| Rear notch in the back, from the inner face of each side | 50 × 13 mm |
| Front screw line above the underside of the runner | 38 mm |
| Push-to-open version | TIP-ON, for example 760H2500T |
| Push-to-open: smallest gap round the front | 3.5 mm |
| Push-to-open: front screw line | 38 mm |
| Push-to-open: clear depth behind an inset front | nominal length + front thickness + 7 mm |
| Push-to-open: also in the BOM for each drawer, for a 564 mm opening | TIP-ON synchronisation linkage ZST.1160W cut to 315 mm; TIP-ON locking device and adapter set T57.7400.01 |